Skip to product information
  • Vetonek Set mesa y sillas de bar 3 pzas madera maciza acacia

Set Table and Chairs 3 Pzas Maciza wood acacia

201,07 €
201,07 € 226,30 €
You save 11% (25,23 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our bar furniture set will become the focus of attention both in the interior space and outside your home. The set is made of solid acacia wood and is very robust, stable and durable. The resistant Ratán Pe in the chair seat and the backup give the set an elegant design. The wood structure brings the rustic style of the set. The set is easy to mount. The delivery includes 1 bar table and 2 bar chairs. Note: We recommend covering this furniture when it rains, snow or ice to last as long as possible.

  • Color: Brown and light gray
  • Table material: solid acacia wood
  • Silla material: Ratán + Acacia Wooden Seat
  • Table dimensions: 60 x 60 x 105 cm (length x width x high)
  • Chair dimensions: 42 x 45 x 90 cm (wide x high x high)
  • Seat height from the floor: 75 cm
  • The delivery includes 1 bar table and 2 bar chairs

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.