Skip to product information
  • Vetonek Silla de pesca con reposabrazos plegable taupe

Fishing folding fishing chair taupe

155,81 €
155,81 € 175,36 €
You save 11% (19,55 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This fishing chair is comfortable and portable, so it is ideal for long fishing sessions or simply to be outdoors. Durable and resistant: The fishing chair is made of steel with powder coating, which guarantees its durability and robustness for prolonged use. Common and practice: the fishing chair has a foam pad Easy to clean, while providing a soft and comfortable seat experience. In addition, it has wide places and its support can be adjusted from 0 to 180 degrees, which reduces the tension in the back and the upper part of the legs and allows it to sit comfortably throughout the day. Practical design: the adjustable legs of the Fishing chair are equipped with mud feet, which guarantees comfortable use even in irregular terrain and prevents them from sinking into the soft floor. Transport. . It is an ideal option for outdoor activities.

  • Color: Taupe and black gray
  • Structure material: powder coating steel
  • Seat material: 600d oxford fabric with foam padded
  • Total dimensions: 61 x 92 x 100 cm (wide x high x high)
  • Folding dimensions: 62 x 20 x 88 cm (length x width x high)
  • Seat dimensions: 50 x 45 x 46-56 cm (wide x high x high)
  • Backup angle: 0-180 degrees
  • Load capacity: 180 kg

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.