Skip to product information
  • Vetonek Sombrilla de jardín con luces LED palo de aluminio verde 270 cm

Sombrilla de jardín con luces LED palo de aluminio verde 270 cm

103,28 €
103,28 € 116,24 €
You save 11% (12,96 €)
Tax included. Shipping calculated at checkout.

Description

Esta sombrilla de jardín es perfecta para crear sombra y protegerse de los dañinos rayos UV del sol. Hecho de poliéster con protección UV y anti-decoloración, la cubierta de la sombrilla brinda una protección óptima contra el sol y es fácil de limpiar. El fuerte poste de aluminio, junto con 6 cvarillas de acero robusto, hace que la sombrilla sea muy estable y duradera. La sombrilla de jardín se puede abrir y cerrar fácilmente gracias al mecanismo de manivela. Las 18 luces LED integradas, que funcionan con 1 panel solar, crearán un ambiente acogedor y romántico por la noche. El artículo es fácil de montar. Ten en cuenta que recomendamos tratar la tela de la sombrilla con un aerosol impermeabilizante si se ve sometida a fuertes lluvias.

  • Color: Verde
  • Materjal: kangas (100% polüester), alumiinium
  • Dimensiones totales: 270 x 236 cm (diámetro x alto)
  • Diámetro del poste: 38 mm
  • Con mecanismo de manivela y ventilación
  • Incluye 24 bombillas LED y 1 panel solar
  • Potencia del panel solar: 1,6 W
  • Incluye 6 varillas
  • Requiere montaje: Sí
El producto no es adecuado para condiciones climáticas como vientos fuertes, nevadas y condiciones climáticas extremas. Este producto funciona con CC de 5 V, pero la fuente de alimentación USB certificada de 5 V no está incluida. El alto voltaje puede causar sobrecalentamiento y puede provocar daños al dispositivo y el riesgo potencial de sobrecalentamiento e incendio.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.