Skip to product information
  • Vetonek Soportes para plantas 3 piezas madera maciza pino marrón cera

Soportes para plantas 3 piezas madera maciza pino marrón cera

90,18 €
90,18 € 101,49 €
You save 11% (11,31 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Estos soportes de madera para plantas serán una opción perfecta para exhibir tus flores y plantas favoritas y será un bonito aporte decorativo a tu hogar. Construcción robusta: Estos soportes para plantas están hechos de madera maciza de pino para mayor estabilidad y durabilidad. La madera de pino maciza es un bonito material natural. La madera de pino tiene un grano recto, y los nudos dan al material su firma, aspecto rústico.Función versátil: Estos maceteros son perfectos para exhibir tus plantas, flores o adornos favoritos. También pueden utilizarse como mesas auxiliares o para servir comida y bebida en reuniones y fiestas.Amplios usos: Estos soportes para flores son adecuados para usarlos tanto en interiores como al aire libre, como en el salón, el comedor, la entrada, el pasillo, el balcón y el patio. Advertencia:Para evitar que vuelque, este producto debe usarse con el dispositivo de fijación a la pared suministrado.

  • Color: Marrón cera
  • Material: Madera maciza de pino
  • Dimensiones: 34 x 34 x 110 / 80 / 50 cm (ancho x profundo x alto)
  • Requiere montaje: Sí
  • La entrega contiene:
  • 3 x Soportes de planta
  • Legal Documents:

    Puedes encontrar más detalles sobre cómo evitar que los muebles se vuelquen aquí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.