Sounded and steel wood and steel 80x42x180 cm
Description
This bookstore emanates a vintage charm that will be a timeless contribution for the decoration of the house. The independent shelf is has a resistant steel structure and solid fir wooden shelves, and is very robust and lasting. The shelf has 5 shelves that provide wide space to save and expose your collection of books, DVDs, files and other decorative articles. Cross -rear steel structures reinforce the industrial style of the shelf. The shelf is easy to assemble. Keep in mind that red points are not oxide but product decoration.
- Black color and natural wood
- Material: Sounded Apute Wood + Steel
- Dimensions: 80 x 42 x 180 cm (wide x high x high)
- With 5 shelves
- Polished, painted and lacquered
- Easy to ride
- Max. Load capacity (total): 50 kg
- Max. Load on shelf: 10 kg
- WARNING: To avoid turnaround, this product should be used with the setting device to the wall proportioned
- Legal Documents:
You can find more details on how to prevent furniture from turning here
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.