Speakers Professional Scenario Hifi Liabilities 2 UDS 1000W Black
Description
These high -fidelity scenario speakers are durable and appropriate for activities, events and parties of medium size. Both speakers are designed with two serious reflex holes, which can extend the frequency response to the lowest range and provide serious. These are produced by 2 -inch (20 cm) high strength woofers whose serious relief membrane helps to avoid destructive local vibrations. The bass is especially suitable for dance and music activities in the context of a low heavy. Each one contains a high performance Woofer to produce a professional quality sound. Stable housing with protective corners and metal grid protects the speaker box from physical influences during assembly, modification and disassembly. The embedded handles on both sides can be transported comfortably. You only need to connect the speaker to the amplifier or receiver with the standard speaker cable.
- Color: black
- Material: particle board, iron, plastic
- Dimensions: 30 x 24.5 x 74 cm (length x width x high)
- Maximum power (each): 500 W
- Maximum power (each): 250 W
- Maximum output: 100 W (each)
- Impedance: 6.8 ohms
- Sensitivity: 40 - 90db
- Frequency response: 30Hz - 20khz
- Woofer size (each): 8 "(20 cm)
- Weight (each): 11.2 kg
- With mango and connector
- Protection profile in the corner
- Requires assembly: Yes
- Delivery contains:
- 2 x stage speakers.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.