Skip to product information
  • Vetonek Película solar estática efecto reflectante plateado 60x1000 cm

Static solar film Silver reflective effect 60x1000 cm

12,85 €
12,85 € 14,46 €
You save 11% (1,61 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Improve your privacy and style with this solar sheet. Privacy protection: Windows privacy sheet provides a mirror effect by reflecting light during the day, which can protect your privacy in addition to offering you a great unidirectional vision. UV lightning blocking and glare control: this window movie Domestic can reduce heat and glare, provide better isolation and filter the harmful UV rays, creating a more comfortable interior environment. You can also slow down the aging and discoloration of furniture. Multiple uses: The window tintal lamin You can easily cut to adapt to different ways to meet your needs. INSTALLATION CONSECTIONS: Thoroughly clean the surface where it will be placed. Measure the surface and cut the movie. Spray the surface with water. Remove the movie from transparent support. Install the film on the destination surface. Use the scraper to eliminate excess bubbles. Clean the water with a towel. Useful information: The product must be applied to a smooth surface. The mirror effect will be invested at night, since the interior will be exposed to more light than the exterior, so the curtains are necessary during the night.

  • Color: Silver
  • Material: PVC
  • Dimensions: 60 x 1000 cm (width x long)
  • Thickness: 0.11 mm
  • Reflective effect
  • Static
  • Delivery contains:
  • 1 x window sheet
  • 1 x plastic scraper

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.