Skip to product information
  • Steinel Lámpara de interior con sensor RS LED M1 V2 plateada 052492

Steinel Interior lamp with RS Sensor M1 V2 Silver 052492

99,42 €
99,42 € 111,90 €
You save 11% (12,48 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The RS LED M1 V2 model of the Steinel brand is a roof lamp with interior sensor with an elegant and modern design and an integrated high frequency sensor. It is ideal for interior use on walls and ceilings, since it combines environmental lighting, good lighting and intelligent technology. The avant -garde LED technology used, together with the innovative 360 ​​° high frequency sensor ensures that their energy expenses remain low because LEDs are very energetically efficient and, thanks to the sensor, the lamp only turns on when you need it and never You can forget to turn it off. The sensor light is also equipped with a practical night light mode, which will use only 10% of its regular light output of 560 lumens, so it can provide an environmental light of good taste and optimal lighting. The roof lamp with interior sensor also has a 4 -hour manual cancellation for when you want the light to remain on and do not respond to the sensor.

  • Color: White and silver
  • Material: Plastic
  • Dimensions: 22.5 x 23 x 8 cm (length x width x height)
  • Power supply: 220-240 V ~, 50/60 Hz
  • Power: 9.5 W (0.4 W on hold)
  • Light output: 560 lm
  • Light temperature: 3000 K (warm white)
  • IP classification: IP20
  • Protection class: II
  • Detection angle: 360 °
  • Field sensor: 160 °
  • Integrated high frequency sensor
  • With practical night light function (10%).
  • 4 -hour manual cancellation
  • Interconnectable
  • Time adjustment: 5 seconds to 15 minutes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.