Skip to product information
  • Vetonek Toldo parasol gris taupe 3x2,4 cm 180 g/m²

Taupe gray parasol awning 3x2.4 cm 180 g/m²

218,38 €
218,38 € 245,79 €
You save 11% (27,41 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This dinner will bring your family and friends the comfort and protection of the sun. His awning protects against the sun. It is a perfect shelter for family gatherings, barbecues, picnics, camping and birthday parties. It presents a robust steel construction and a polyester awning, the awning is robust and durable. It is also easy to mount. Note: This product should never be used in adverse weather conditions, such as strong winds, strong rains, snow, storm, etc.

  • Color: Taupe Gray
  • Material: Steel, fabric (100% polyester)
  • Dimensions: 3 x 2.4 m (length x wide)
  • Front height: 2.05 m
  • Rear height: 2.55 m
  • Fabric weight: 180 g/m²
  • Requires assembly: Yes
Keep children and pets away from the assembly area until the work is finished. Some pieces may have sharp edges; Use protective gloves if necessary. The dinner must be placed and fixed only on a flat and level surface. Do not try to mount the dinner in wind or humidity conditions. Do not place the dinner in a space exposed to excessive wind. If you use electric tools or a ladder, always follow the manufacturer's safety instructions to avoid injuries. Do not use open flames in the dinner or near the pavilion. Hot elements such as grills, torchs, etc. should not be stored in the dinner, etc. recently used. Set the dinner with the pins provided.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.