Skip to product information
  • Vetonek Paneles acústicos para paredes Aku 4 uds roble oscuro

Vicart Acoustic Panels for Aku walls 4 UDS Dark Roble

90,93 €
90,93 € 102,34 €
You save 11% (11,41 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Turn an empty and boring wall, a design easily with these Vetonek wall panels! Sustainable material: This AKU panel is made of MDF coated with natural and felt wood, which are 100% sustainable. Acousticabsorption: acoustic panels absorb echoes, waves and unwanted reverberations, which allows you to better enjoy activities in both residential spaces As commercials. Amlies uses: the wood wall panels are great as wall coatings for the bedroom, the living room, the hall, the lobby, the hotel, the restaurant, the office, the cafeteria, the pub, the mall, the mall, the mall, the mall, the shopping center, etc. 3 -sided natural wood covered: although most wall panels in the market have a single natural wooden plate with a single side, and some simply offer wood imitation cover, these wall panels are They stand out with a 100% natural wood cover on three sides. Modern design: the wood panel is available in 8 colors that create a warm and modern aesthetic appearance in your home. Useful information: Vetonek hybrid adhesive is installed (not included). You can buy it in our store. Colors and veins vary in each item, so each piece is unique. Delivery is random, ensuring the exclusivity and individuality of the product.

  • Color: dark oak
  • Material: Felt, natural wood cover, MDF
  • Dimensions (each panel): 80 x 40 cm (length x wide)
  • Thickness: 2.1 cm
  • Delivery contains:
  • 4 x wall panels (for 1.28 m² of wall)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.