Skip to product information
  • wolfcraft Sierra de calar ajustable AH 45-130 30 mm metal 5978000

Wolfcraft Sierra de Calar adjustable Ah 45-130 30 mm metal 5978000

62,85 €
62,85 € 70,73 €
You save 11% (7,88 €)
Tax included. Shipping calculated at checkout.

Description

This Ah 45-130 Adjustable Hall Sierra of Wolfcraft is suitable for cutting precise holes in plaster panels, OSB panels, soft wood, plywood, etc of plaster. The special geometry of the teeth is designed for fine and clean cuts. It can be adjusted on 3 levels: loose-synchronized-adjusted adjustment. Its large drilling disk keeps the work area protected. The reliable dust extractor helps keep the adjustment mechanism in working mode. This adjustable caulus saw with three straight blades will be your best choice!

  • Diameter: 45-130 mm
  • Cutting depth: 30 mm
  • Material: Metal
  • Triangular mango
  • For plaster panels, OSB panels, soft wood, plywood
  • A product for all standard plaster installation
  • Infinite adjustment in 3 steps: loosen - adjust synchronously - hold
  • Special teeth geometry for fine and clean cuts
  • Three integrated measures for all standard measures
  • Protected work area thanks to the large drilling disk
  • Reliable dust extraction for a permanent operation mechanism
  • With 3 straight blades
  • Double -sided blister packaging

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.