Skip to product information

Basalt and Humus | Mineral Amendment with Microbiota

19,00 €
19,00 €
Tax included. Shipping calculated at checkout.
Container

Description

The mineral amendment with microbiota "Basalto Plus humus" combines the remineralizing capacities of basalt flour with the biological vitality of earthworm humus. This product was designed to rejuvenate and enrich soils, providing a solid and healthy base for plant growth.

Composition:

Uses and benefits:

  • Mineral strength: It provides a wide range of essential minerals and trace elements.
  • Biological dynamism: It introduces microorganisms beneficial to the soil, improving your general health.
  • Structural improvement: The inclusion of humus improves the texture and porosity of the soil.
  • Resilient crops: It promotes the growth of stronger plants and resistant to adverse conditions.
  • Eco-Amigable: 100% natural product that respects the soil ecosystem.
  • Irrigation optimization: Improves soil capacity to retain water, reducing the need for irrigation.

Recommended dose:

  • Vegetables: 1.2 kilos of the mixture per square meter.
  • Semilleros: Mix 30% of "Basalto Plus humus" with 70% of substrate.
  • Ornamental plants: Mix 30% of "Basalto Plus humus" with 70% of substrate for new plantations. Maintenance: 230 grams quarterly.

Available presentations:

  • Big Bag: 1,000 liters (800 kg.)
  • Saco: 15 liters (12 kg.)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.