Skip to product information

Tile grout cleaner

9,95 €
9,95 €
Tax included. Shipping calculated at checkout.
Packaging

Description

Fila FUGANET SPECIFIC CLEANING OF JOINTS: Maximum Efficiency in Cleaning Joints

What is it for?

Fila FUGANET is designed to deeply clean the joints of glazed ceramic tiles, porcelain stoneware and vitreous mosaics (gresite). This specialized product ensures that the joints are impeccable, restoring their original appearance and maintaining the aesthetics of your surfaces.

Advantages

  • Biodegradable ingredients: An ecological option that respects the environment while offering effective cleaning.
  • Easy to use: Equipped with a practical container that includes an ergonomic handle and atomizer for a comfortable and precise application.
  • Safe for tiles: Does not damage or stain treated surfaces, protecting the integrity of your tiles.
  • Acid-free and sodium hypochlorite-free: Careful formulation that avoids risks associated with aggressive chemicals.

Ideal for

  • All types of joints

How to use

Fila FUGANET comes ready to use, with no need to dilute.

Application:

  1. Spray FUGANET directly on the joint you want to clean.
  2. Leave the product on for a few minutes to penetrate and loosen the dirt.
  3. Scrub with a brush to remove residue and rinse with water to reveal clean, renewed joints.

In cases of extremely dirty joints, a thorough initial cleaning with DETERDEK PRO diluted in up to 10 parts water is recommended to achieve the best results.

Attention

Do not use FUGANET on polished methacrylate, marble, limestone or terrazzo surfaces. It is important to follow these recommendations to avoid damage and maintain the durability of the surfaces.

Performance

With a 750 ml container, Fila FUGANET can clean up to 850 linear meters of joints, offering efficient and long-lasting performance. Performance is indicative and may vary depending on conditions of use.

Formats

Available in 750 ml plastic containers with sprayer, in boxes of 6 units. This format is designed to maximize comfort of use and cleaning efficiency.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.