Self-leveling mortar Vetonek

655,00 €
655,00 € 14,60 €
Tax included. Shipping calculated at checkout.
Container

Description

Easy application mortar to repair and/or prepare soils to place parquet or tile for example.

If you want to change or improve the floor of a room today is cheaper and easier than ever. Thanks to its fluidity, it welcomes very smooth surfaces and with high planimetry, without fissures and with great hardness.

  

Save money | Take advantage of your time | Professional result

The Vetonek self -leveling mortar is used to repair very damaged soils or to improve concrete soils for example, to prepare the ground to place a parquet or any type of tile later. If you have another previous tile, you can fill with the self -leveling mortar and place a parquet or tile, from 5 to 50 mm thick so the height of the room will not rise excessively.

 

Preparation and placement of autoniverse

Of great resistance even with little thickness its preparation and placement is very simple, prior experience is not necessary for what you can do yourself or your trust.

It is a professional product, the result is not going to disappoint you, you just have to follow the indicated steps, the amount of water indicated and mix well.

It is important to clean the old soil, that you do not have wet, or dust and that is not flexible.

Pour in a capable 3.5 liters of clean water for each 25 kg sack, shake and mix to be able to be with low revolution electric blender, if it is not possible it can be done by hand, you have to waste a little more time, With about 5 minutes of kneading it is enough. Do not add in any case more water than the indicated, the mortar will lose properties.

Extend the material with a single layer between 5 and 50 mm with a leveling plain, if we pass a string roller we will help the occluded air out before.

In any case today you only have to look for tutorials, both writings and videos, check yourself that is very easy to apply.

 

Characteristics

For interior use only, it is suitable for soils with radiant heating, pedestrianly tramable at 24 hours and possibility of dressing it at 7 days. 25 kg bags.

 

5% discount if you buy complete pallets of 50 bags of 25 kg.

 

How much self -leveling mortar do I need?

1.9 kg is needed. by m² and mm thick. For example for 20 4 mm thick we will need 152 kg. of self -leveling mortar.

To clean the spots and fresh tools with a little water, it is sufficient, mechanical means are needed.

 

 

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.