Skip to product information
  • Vetonek Muebles de jardín de palés 10 piezas y cojines madera de abeto

10 -piece pallet garden furniture and fir wood cushions

980,11 €
980,11 € 1.103,10 €
You save 11% (122,99 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This 10 -piece nardrous pallet furniture game is an excellent option to relax and enjoy the good weather, take a nap or chat with your family or friends. The wooden living room game, with a timeless pallet design, adds a touch of rustic charm to your patio, garden or living room. The garden furniture game is made of impregnated fir wood, which makes it lasting and stable. This patio sofas game has a solid construction and requires little maintenance. With a resistant surface, the table is ideal for having food and drinks within reach. Thanks to 100% polyester upholstery and the thick padding, the cushions are soft and provide maximum comfort. In addition, the modular design also allows the set to be placed in any provision according to your taste. Keep in mind that wood is a natural product and can show imperfections.

  • Cushion color: red
  • Material: impregnated firing wood, fabric (100% polyester)
  • Dimensions of the central sofa/corner: 60 x 60 x 65 cm (wide x high x high)
  • Table dimensions: 60 x 60 x 30 cm (wide x high x)
  • Seat height from the floor: 30 cm
  • Seat cushion dimensions: 60 x 60 x 6 cm (wide x high x high)
  • Backup cushion dimensions: 60 x 38 x 13 cm (wide x high x high)
  • Lateral cushion dimensions: 55.5 x 38 x 13 cm (wide x high x)
  • Requires assembly: Yes
  • Delivery includes:
  • 5 x central sofas
  • 4 x corner sofas
  • 1 x table
  • 9 x seat cushions
  • 13 x rear/side cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.