Skip to product information
  • Vetonek Set de mueble de baño 2 piezas cerámica y madera de ingeniería

2 -piece ceramic bathroom and engineering wood set

337,38 €
337,38 € 379,71 €
You save 11% (42,33 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This elegant set of bathroom furniture, which has a wide storage space, is a great contribution to the bathroom, and will give an orderly and striking look! Durable material: engineering wood is of exceptional quality with a smooth surface and also presents strength, stability and moisture resistance. Durable material: the bathing sink, made of ceramics, has a lasting surface that resists in front of impacts, spots and scratches, in order to guarantee a durable brightness. Skip Storage space: The bathroom closet offers a wide storage space to maintain various well -organized daily essential items and within reach. Bathroom can be mounted on the wall to add extra storage space. That way, you can release space on the floor and have your orderly and clean atmosphere. Useful information: screws and tacos for the interior of the wall are not included. We recommend looking for and using adequate screws and tacos specifically for your walls. If you are not sure, you can consult with a professional. Read and continue every step of the instructions.

  • Bathroom closet with sink:
  • Color: Sonoma oak
  • Material: Engineering Wood
  • Total dimensions: 90 x 38.5 x 45 cm (wide x high x high)
  • Washbasin:
  • Color: White
  • Material: ceramic
  • Total dimensions: 91 x 39 x 18 cm (length x width x high)
  • Ceramic edge thickness: 4 cm
  • Drainage hole diameter: 4.5 cm
  • With an anti overflow hole
  • With tap
  • Thrust drainer with overflow function
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x bathroom closet with sink
  • 1 x sink
Children must be supervised to make sure they do not play with the device. Keep children away from the assembly area. ATTENTION: Read the instructions carefully before using and keep them for future consultations.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.