Skip to product information
  • Vetonek Toldo bimini de 4 arcos gris 243x210x137 cm

43x210x137 cm bimini bimini awning

216,19 €
216,19 € 243,32 €
You save 11% (27,13 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This 4 -arc bimini hood with side walls plays an effective role to protect you from direct sunlight and adverse climatic conditions such as hail or rain. Durable material: This 4 -arc bimini hood is made of 100% polyester with a PU coat of aluminum and a 4 -arc frame design adds to its stability. Duration: Ojales hooks, assembly nuts and knobs are made of stainless steel 316 of marine grade, which is anticorrosion and especially suitable for long use for use term. Useful information: Use the boot to protect the fabric when you do not use the upper part of the bimini and fold the capota when the vessel speed exceeds 25 knots.

  • Color: black
  • Material: 600d polyester with PU coating, aluminum
  • Total dimensions: 243 x 210 x 137 cm (length x width x high)
  • Flexible assembly width: 200-213 cm
  • Aluminum post diameter: 25 mm
  • 4 arc structure design
  • 2 nylon adjustable straps with stainless steel clip
  • Nylon accessories with stainless steel accessories kits
  • Includes a matching storage chest
  • Assembly accessories included (the eyelet hook, the assembly nut and the knob are made of 316 marine stainless steel)
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x 4 arc bimini awning
  • 2 x extra straps
  • 2 x additional eye hooks with screws

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.