Skip to product information
  • Vetonek Toldo Bimini de 4 arcos gris antracita 243x210x137 cm

43x210x137 cm bimini bimini awning

266,56 €
266,56 € 300,01 €
You save 11% (33,45 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This quality bimini awning has a 4 -arc frame design, which plays an effective role in protecting you from direct sunlight and adverse weather conditions, such as hail or rain. With a height of 137 cm, this ship canopy is adjustable from 200 to 213 cm wide, providing you with a very large space while enjoying your navigation experiences. Made of 100% polyester with PU coating, it is resistant to UVA and water rays and durable for years. The anodized aluminum picture provides stability. Hooks, assembly nuts and knobs are made of 316 marine stainless steel, which is anticorrosion, and is especially suitable for long -term use. Important note: Use the trunk to protect the fabric when you do not use the bimini awning and fold the awning when the boat exceeds 25 mph.

  • Color: Anthracite gray
  • Material: fabric (100 % polyester with PU coating) aluminum
  • Dimensions: 243 x 210 x 137 cm (length x width x high)
  • Flexible assembly width: 200-213 cm
  • Aluminum post diameter: 25 mm
  • 4 arc structure design
  • Assembly accessories (eye hooks, assembly nuts and knobs are made of 316 marine stainless steel, other accessories are made of 304 stainless steel)
  • Adequate for long -term use
  • Includes a matching storage chest
  • 2 nylon adjustable straps with stainless steel clip
  • UVA and Water Rays Resistant, Antimoho
  • Nylon accessories
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.