Skip to product information
  • Vetonek Polipasto de andamio eléctrico 500 kg 230 V

500 Kg 230 V electric scaffolding polypest

600,88 €
600,88 € 676,28 €
You save 11% (75,40 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This electrical polypest is easy to attach to the scaffolding with their unique design and their elegant form. Makes the transport of construction material, etc. to the upper floors and ceilings is much easier and more safe. Its powerful and maintenance engine is ideal for a wide range of elevation work. It is made to last, thanks to its robust elaboration and the improved gearbox. It has a 1.9 m cable remote control and an air intake to connect wireless remote control (not included). The steel cable is designed to reduce torsion. It has two methods: you can use a single cable to lift a maximum of 250 kg or a double cable to lift a maximum of 500 kg. In addition, this electrical polypest is also equipped with an emergency stop switch, an automatic brake and a thermal protection device to guarantee safety in elevation work.

  • Red
  • Housing material: steel
  • Dimensions: 32 x 29 x 25 cm (length x width x high)
  • Motor Power: 1000 W
  • Nominal voltage: 230 V
  • Nominal frequency: 50 Hz
  • Steel rope diameter: 4 mm
  • Steel rope length: 30 m
  • Manual control cable length: 1.9 m
  • Average elevation speed: simple cable 8 m/min, double cable 4 m/min
  • Max. Elevation height: Simple cable 30 m, Double cable 15 m
  • Load capacity: Simple Cable 250 Kg, Double 500 Kg Cable
  • With an air intake to connect the wireless remote control (not included)
  • You can buy the corresponding wireless remote control in our store
  • Protection class: IP 54
  • With emergency stop switch, automatic brake function and thermal protection device
  • Please keep in mind that the elevator frame is not included
Do not allow children to play with the device. It is not a toy. Only users with technical skills should use the tool. Keep children and other people away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.