Agerul locking block Duo 5 in 1 marine breeze - 2x50 grs
Description
Product description
He WC Agerul Ambient Block in pack of 2 x 50gr It is the ideal solution to maintain your fresh and clean toilet. With his Marine breeze aroma, this disinfectant and ambient product transforms the experience of use of the bathroom.
Characteristics and benefits:
- Active foam: Eliminates bacteria and dirt effectively.
- Antic: Avoid the accumulation of water marks in the cup of the toilet.
- Dirt Protector: Prolong the cleaning results for a more hygienic bath.
- Rinse aid: Leave a brilliant finish after each tank discharge.
- Powerful atmosphere: The aroma of Marina breeze wraps the bath in freshness.
Mode of use
For optimal use, place the block in the toilet cup, near the main outlet of the cistern water. Lower the lid and press the cistern to activate the product. You will notice the environmental effect immediately.
Precautions
- It can cause irritations if you contact eyes or skin. Wash immediately with plenty of water if this occurs.
- Keep out of children's reach.
- Do not ingest.
In case of accident, contact the toxicological information medical service: 915 620 420.
Recommended uses
Ideal for high -transit toilets and bathrooms such as offices, aesthetic centers, gyms, hospitals and hospitality places.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.