Skip to product information
  • Vetonek Arriate con cubierta invernadero aspecto ratán 40x40x140 cm

Arriate with greenhouse covers Ratán 40x40x140 cm

51,87 €
51,87 € 58,38 €
You save 11% (6,51 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This greenhouse driver offers a lot and climb for it. FUNCTIONAL CUBEER: The high driver has a water -resistant polyethylene cover that protects your extreme temperatures plants and keeps insects, birds and small animals away. Practical design: the elevated hoodie includes zipper for ventilation, what which allows you to adjust the cover as necessary. In addition, it has ropes at the top, which facilitates the subjection of the network to the tube. DESIGN with the appearance of Ratán: the high driver, with rattan -looking design, adds a touch of natural charm to its space of life to the life to the Free air. DIVERSE USES: The high driver provides a wide space for your plants, vegetables, herbs and flowers. You can use it in gardens, patios, balconies, etc.

  • Arriate color: black
  • Network color: green
  • High bed material: PP (polypropylene)
  • Network material: PE (polyethylene)
  • Tube material: iron
  • Arriate dimensions: 40 x 40 x 44 cm (length x width x high)
  • Greenhouse dimensions: 40 x 40 x 110 cm (length x width x high)
  • Tube dimensions: 40 x 40 x 120 cm (length x width x high)
  • Total dimensions: 40 x 40 x 140 cm (length x width x high)
  • With waterproof greenhouse cover
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.