Bathroom furniture set 3 pcs plywood plywood oak brown

224,37 €
224,37 € 252,52 €
You save 11% (28,15 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This fashionable bath furniture set is destined to be an excellent contribution to the bathroom, which gives an orderly and striking look! Durable material: engineering wood has exceptional quality, with a smooth surface and also has strength, stability and moisture resistance. Iron legs: Iron legs add a modern and quiet style to the house, in addition to guaranteeing its stability. Storage space: The bathroom furniture offers various storage options and a wide space so you can keep objects in the bathroom . Practical design: The upper part of the sink furniture is ideal for placing the sink. WARNING: To prevent it from turning, this product should be used with the setting device to the wall included. Useful information: The sink is not included in the delivery. The screws and the tacos for the interior of the wall are not included. We recommend finding and using adequate screws and tacos specifically for the walls. If you are not sure, you can consult with a professional. Read and continue every step of the instructions.

  • Color: Brown oak
  • Material: engineering wood, iron
  • Dimensions of the bathroom closet (high): 30 x 30 x 190 cm (length x width x high)
  • Dimensions of the bathroom closet (bass): 30 x 30 x 100 cm (length x width x high)
  • Dimensions of the washbasin closet: 65 x 33 x 60 cm (length x width x high)
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x bathroom closet (tall)
  • 1 x bathroom closet (bass)
  • 1 x sink cabinet
  • Legal Documents:

    You can find more details on how to prevent furniture from turning here

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.