Skip to product information
  • Vetonek Toldo de playa con anclas de arena verde 304x300 cm

Beach awning with green sand anchors 304x300 cm

90,62 €
90,62 € 102,00 €
You save 11% (11,38 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The beach awning is ideal for you to relax and have fun on the beach or camp without solar burns. UV protection: The beach store is made of polyester and offers a SPF 40+ coverage to block the harmful UV rays and reduce solar burns. Assets: the beach umbrella is easily riding and comes with posts and four sandbags that allow them to be used on sandy beaches and thick grass areas. Illigera and portable: the folding and light design allows you to place it or save it easily in the transport bag included to facilitate its transport. Multiple uses: The beach shelter is ideal for the majority for most Of your outdoor activities, whether to provide shadow on the beach, play with children in the backyard or hiking in nature.

  • Color: gray and green
  • Material: Polyester and Steel
  • Total dimensions: 305 x 300 x 213 cm (length x width x high)
  • Timensions of the awning: 304 x 300 cm (length x wide)
  • Support pole dimensions: 1.9 x 213 cm (high diameter)
  • Transport bag dimensions: 50 x 20 x 15 cm (length x width x high)
  • Weight: 180 g
  • UV+40
  • Recommended capacity: 8 people
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x curtain with 4 sand anchors
  • 2 x support post
  • 4 x chinches
  • 1 x sand shovel
  • 1 x transport bag
The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.