Skip to product information
  • Vetonek Estructura de cama madera de ingeniería gris hormigón 120x200cm

Bed Structure Gray Engineering Wood Concrete 120x200cm

175,98 €
175,98 € 198,07 €
You save 11% (22,09 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Get a more repairing dream with this bed structure. It is a cozy contribution for any bedroom. Durable material: The structure of the bed is made of engineering wood. Engineering wood has an exceptional quality, with a smooth surface and also with strength, stability and moisture resistance. SHEET SOMIER for optimal support: the bed structure is equipped with a sheet somier for support and breathability of the mattress. Storage function: This Somier offers open compartments to keep your magazines, books, toys and other well -organized small objects. Useful information: The mattress is not included with the bed. We have a varied selection of mattresses. You can take a look at our store to look for the corresponding mattress.

  • Color: concrete gray
  • Bed structure material: engineering wood
  • SELLONE MATERIAL: plywood
  • Total dimensions: 203 x 123 x 35 cm (length x width x high)
  • Compartment dimensions (each): 68.5/60 x 18.5 x 15 cm (length x width x high)
  • Adequate mattress dimensions: 120 x 200 cm (width x long) (the mattress is not included)
  • Requires assembly: yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.