Skip to product information
  • Vetonek Soporte para monitor doble acero negro VESA 75/100 mm

Black Black steel monitor support 75/100 mm

51,78 €
51,78 € 58,27 €
You save 11% (6,49 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Have you ever complained about the limited space on the desk? Have you ever experienced voltage in the neck and shoulders when sitting for long periods of time? So this double support for adjustable monitor is your best option! Adjustable in many ways: This monitor support can be lean up or down 15 °, turn left or to the right 45 ° and turn 360 °. You can also adjust your height for a better visualization. Cable organizer: The monitor support has a hidden clip to organize the cables and a storage slot for Allen keys, which helps keep your desktop clean and orderly. Easy installation: This desktop monitor support is complete with instructions and all the necessary accessories for easy installation. Resistant material: Steel is a very hard and resistant material. It offers robustness and stability. In addition, the broader independent base also increases the stability of this support for Vesa monitor.

  • Color: black
  • Material: Steel
  • Vesa size: 75x75 mm / 100x100 mm
  • Post height: 80 cm
  • Post diameter: 3.5 cm
  • Suitable screen dimensions: 13 "-27"
  • Maximum load capacity (per plate): 10 kg
  • Standing
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.