Skip to product information
  • Vetonek Juego de tocador negro 74,5x40x141 cm

Black dressing table 74.5x40x141 cm

117,97 €
117,97 € 132,77 €
You save 11% (14,80 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The modern dressing table gives your bedroom a timeless and refined look. The toilet with stool is a perfect complement to decorate your bedroom and also keep your cosmetics by hand. Stable material: plywood has an exceptional quality, with a smooth surface and also has strength, stability and moisture resistance. Amplio Storage space: The Drug table offers ample space to easily access your makeup, jewelry and basics For the day to day. Playful despejo: the t -table with a mirror is perfect for your daily beauty routine. The mirror allows you Minimalist aspects as part of the interior design style. WARNING: To prevent it from turning, this product should be used with the setting device to the wall included.

  • Color: black
  • Material: plywood, acrylic
  • Dimensions of the tarding table: 74.5 x 40 x 141 cm (wide x high x high)
  • Taburete dimensions: 70 x 35 x 45 cm (length x width x high)
  • Requires assembly: yes
  • Delivery contains:
  • 1 x dressing table
  • 1 x stool
  • Legal Documents:

    You can find more details on how to prevent furniture from turning here

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.