Skip to product information
  • Vetonek Tablero de baloncesto polietileno negro 90x60x2 cm

Black polyethylene basketball board 90x60x2 cm

85,41 €
85,41 € 96,12 €
You save 11% (10,71 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Practice the shot at a basket or challenge your friends to a match with this basketball board. Durable material: This board is made of polyethylene. Polyethylene is the most used plastic material. It is very practical since it is resistant to UV rays, light and easy to maintain. The classic basketball ring, made of steel with a nylon network for all types of climates, also causes the basketball ring to last a long time. Design mounted on the wall: This basketball board can be installed in many places, it can be used as a replacement for a basketball basket, or simply hang on the wall. Samples Uses: This basketball board is perfect to play indoors and exterior. Both adults and children will have a lot of fun. Note: The waterproof canvas is not included product comes with a assembly manual in the box to facilitate assembly.

  • Color: White, black, red, blue
  • Material: polyethylene, steel, nylon
  • Board dimensions: 90 x 60 cm (length x wide)
  • Board thickness: 2 cm
  • Aro diameter: 43 cm
  • Assembly materials are included
Warnings not suitable for children under 3 years. Small pieces and long cable. Danger of suffocation and strangulam-iento! It requires adult assembly. To be used under the direct supervision of an adult. WARNING: Not suitable for children under 3 years. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.