Skip to product information
  • Vetonek Kit de herrajes para puertas correderas acero negro 213 cm

BLACK STEEL BLONGEAS BLACK KIT KIT 213 CM

279,17 €
279,17 € 314,20 €
You save 11% (35,03 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this sacking doors kit, you can easily configure double rails so that a couple of doors slide forward and back of each other. Safe and reliable: Thanks to internal bearings, the doors can slide gently and silently. Door stops are also included to avoid the derailment of the roller, while rubber packing will cushion the roller pump and reduce the noise. Corrosion, which guarantees durable performance. Double grain doors: When the wall on the wall is limited, the grain door derivation support kit allows two barn doors to slide independently in two rails without the need without the need of additional space. Fácil Installation: This Sliding doors set can be easily installed at the barn door with the assembly accessories included, which makes the installation very simple. APPLICATION APPLICATION: This support kit for door of Granero allows one door to slide over another, which makes it perfect for cabinets, pantries or possibly even multiple openings on the same wall. Useful information: Delivery includes only the sacking doors kit. The door is not included in the delivery.

  • Color: black
  • Material: Powder coating steel
  • Maximum load capacity: 80 kg
  • Total length of the Slider Guide: 213.5 cm
  • Proper door dimensions: 107 cm wide, 35-45 mm thick
  • Garnero's door derivation support:
  • Vertical panel size (each): 4 x 23 cm (high x width)
  • Interior distance: 8 cm
  • Compatible barn door rail size: 40 x 6 mm (high x width)
  • Delivery contains:
  • 8 x sliding lanes
  • 8 x door bumps
  • 8 x rollers
  • 4 x Soil guide
  • 20 x fixing clamps
  • 10 x PERFORMATION SUPPORT FOR GARN DOOR
  • Other necessary devices

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.