Skip to product information
  • Vetonek Soporte para piedras de sal de acero negro

Black Steel Steel Stones Support

16,38 €
16,38 € 18,44 €
You save 11% (2,06 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The support for salt stones is not only practical, but also very practical, since it guarantees that the salt block is safely fastened for the well -being of your horse. Durable and robust material: salt block support is made of steel, which makes it robust and corrosion resistant. Practical design: Thanks to its design in a special way, it maintains essential minerals easily accessible to horses, cows and others Large animals. Use: You can easily mount the salt stone support in a wooden post on a ranch or a tree with two outer screws for wood. APPLICATIONS APPLICATIONS: This support for salt blocks is designed to accommodate several blocks, As goat mineral blocks, licking deer salt blocks, etc. It is suitable for a variety of animals, including horses and cows, which makes it a versatile contribution to your farm or stable. Useful information: Assembly screws are not included.

  • Color: black
  • Material: Steel
  • Dimensions: 14 x 8 x 13.5 cm (length x width x high)
  • It has capacity for a standard salt block of 4 pounds

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.