Skip to product information
  • Vetonek Tumbona con cojín ratán sintético negro

Black Synthetic Ratan Cojín Black

182,86 €
182,86 € 205,81 €
You save 11% (22,95 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Our synthetic ratan lorage combines style and functionality and will become the center of garden or patio. Thanks to the water -resistant pe racán, the sunbed is easy to clean, resistant and adequate to use daily. The sunbed has a resistant steel structure with powder coating, so it is very stable and lasting. Both sides of the sunbed can be lifted and regular to get the most comfortable position to sit or lie down. The padded cushion and remove, with foam filling, provides the definitive comfort. The Pojín polyester case barely needs care and can be easily removed to wash it. This lorage is easy to mount. Delivery includes 1 lorage and 1 large seat cushion. Note: We recommend covering the sunbed in case of rain, snow or frost.

  • Color: Black and White Cream
  • Material: Ratán pe + steel structure with powder coating
  • Cushion case material: 100% polyester
  • Dimensions: 195 x 60 x 31 cm (length x width x high)
  • Cushion thickness: 5 cm
  • Adjustable both sides
  • Washable cushion covers
  • Easy to ride
  • Delivery includes 1 lorage and 1 large seat cushion

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.