Skip to product information
  • Vetonek Set de reparación de abolladuras de coche sin pintura 80 piezas

Car repair set without paint without paint 80 pieces

221,34 €
221,34 € 249,12 €
You save 11% (27,78 €)
Tax included. Shipping calculated at checkout.

Description

Whether you decide to address a complete abolish repair project or simply save money by making minor repairs yourself, this automobile abolish repair tools game without paint is the best option. This car repair tools kit comes in different tongue sizes, suitable for most abolish and hail damage. The stainless steel sliding hammer is more powerful to repair abolish and eliminates large dent. The abolish extractor and the update bridge abolish lifting are also suitable for repairing small and medium -sized abolish. Efficient and safe to remove abolish, the abolish repair process can protect the paint. The LED line plate is used to check the abolish of the flat metal surface. Abolladura repair without DIY paint is the most profitable method to eliminate car abollates, hail abolish, motorcycle tanks, etc.

  • Material: stainless steel
  • Pump wedge dimensions: 165 x 165 mm (long x width)
  • Inertia hammer length: 44 cm
  • Storage bag dimensions: 111 x 18 x 19 cm (length x width x high)
  • Delivery includes:
  • 13 x lever rods
  • 1 x glue gun
  • 1 x Red abolish lifter
  • 1 x LED line board
  • 1 x 25 mm hammer
  • 1 x pounding hammer
  • 1x inertia hammer
  • 1 x pumping wedge
  • 1 x cross bridge set
  • 6 x Yellow touch tool
  • 10 x glue bars
  • 1 x mini windy
  • 1 x minibarra in the form of T
  • 1 x Pening set with 8 points
  • 32 x glue eyelashes
  • 3 x S hook
  • 3 x ring in the form of o
  • 1 x Red adjustment tool
  • 1 x canvas bag
Do not allow children to play with the device. It is not a toy. Keep children and other people away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.