Skip to product information
  • Vetonek Rampas de reparación de coches 2 uds acero rojo

Cars repair ramps 2 units red steel

411,86 €
411,86 € 463,54 €
You save 11% (51,68 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This pair of 2 -ton car repair ramps is ideal for raising motor vehicles, such as cars and trucks, in workshops and garages. The ramps have been designed to give you easy access to the lower part of your car and have a maximum elevation height of 375 mm. The ramps can be blocked with an unmissable once the desired work height is reached, and your car will be in a very stable high position. Each of the hydraulic cats supplied offers a maximum elevation capacity of 2 tons/2000 kg, which allows you to replace car accessories and perform routine maintenance more safely and efficiently. Wide ramps can accommodate vehicles with large tires. These car repair ramps have a resistant and lasting high quality steel construction. Thanks to the compact design, they can be stored comfortably in a limited space. Delivery includes 2 hydraulic cars repair ramps.

  • Red
  • Material: Steel
  • Dimensions: 115 x 32 x 31 cm (length x width x high)
  • Input width: 24.5 cm
  • Platform size: 38 x 25 cm (length x wide)
  • Maximum lifting height: 37.5 cm
  • Load capacity: 2 tons
  • Delivery includes 2 cars repair ramps.
Do not allow children to play with the device. It is not a toy. Keep children and other people away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.