Skip to product information
  • Vetonek Mesa y sillas infantiles 3 piezas MDF blanco y gris

Children's table and chairs 3 pieces MDF White and gray

105,26 €
105,26 € 118,47 €
You save 11% (13,21 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this board and chair game, your son and his friend can sit at the table and paint, make crafts, and even play together. This table and chairs game is made of durable MDF, so it is easy to clean and maintain. The table can be used to do puzzles, play board games, make crafts and snack, in addition to reading and writing every day. The edges and corners of the table and the chairs are rounded, to guarantee the safety of children. It is a perfect setting for your children to use it at home, school, nursery, etc.

  • Color: white and gray
  • Material: MDF
  • Table dimensions: 60 x 50 x 48 cm (length x width x high)
  • Chair dimensions: 25 x 25 x 55 cm (length x width x high)
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x table
  • 2 x chairs
Warning. Do not place this product near a window, since it can be used as a step by the child and make it fall out the window, and the cords of the blinds or curtains could strangle the child. Take into account the open fire risk and other sources of strong heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.