Skip to product information
  • Vetonek Luces de Navidad de estrellas 4 uds 140 LED azul 17 cm

Christmas Lights 4 UDS 140 Blue LED 17 cm

40,24 €
40,24 € 45,29 €
You save 11% (5,05 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Create a festive atmosphere at home during Christmas with these star lights! Multifunction remote control: Led low consumption Starburst light has 8 different lighting effects (combination, wave, sequential brightness, pursuit/running water, slow fading, flickering/flashing and constant ignition), you can change the lighting modes with The remote control to create different holiday environments. High flexibility and easy to make yourself: Christmas lighting is made of flexible copper cables of good quality, which facilitates bending it in any way you want, such as bouquets, fireworks, etc. . Synchronization function: The fireworks light has a timer button in the remote control that allows you to control the time of the lights. The garden light will be lit 6 hours and off 18 hours a day, so you will not have to worry about wasting energy. Thanks to the hook of the battery box, you can hang it anywhere.

  • Light color: blue
  • Cable color: transparent
  • Material: copper
  • Thread length (each): 17 cm
  • Extension cable length (each): 2 m
  • Total LED number: 560
  • LED number in each lamp: 140
  • Distance between 2 LEDs: 5 cm
  • IP rating: IP44
  • It works with 4 AA batteries of 1.5 V (not included batteries)
  • Low consumption LED
  • It has 35 threads in each light and 4 LEDs in each thread.
  • Includes 8 light effects
  • Suitable for interiors and exteriors
  • Delivery contains:
  • 4 x Starburst Star Lights
  • 4 x remote controls with timer
This product should not be discarded along with other domestic waste in the European Union.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.