Skip to product information
  • Vetonek Rollo de corcho 100x800 cm 2 mm

CORK ROLL 100X800 CM 2 MM

61,95 €
61,95 € 69,73 €
You save 11% (7,78 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This cork roll is intended to be an ideal isolation for soils, since it retains its isolation value for decades and offers prolonged service. Practical soil insulation: The cork sheet is intended to be the ideal isolation of the soil due to its high elasticity and its long -term pressure stability. And its flexibility makes it easily malleable in curves and corners. Sound damping function: the ground base shocks the sound and eliminates the reverberation of the room. The thicker the cork wall is, the more sound it will be blocked. Heat warning: The insulation base prevents unnecessary heat loss and provides a warm and comfortable sensation to any space. Additional wall decoration: The cork wall paper It can be used as an alternative to paint or wallpaper. When placing it on the walls, you can redecorate the house with few resources and costs. PRACTICAL MAINTENANCE: In addition, light dirt and dust on the cork roll can be removed with a slightly wet cloth or a soft sponge.

  • Color: Brown
  • Material: cork
  • Dimensions: 100 x 800 cm (length x wide)
  • Thickness: 2 mm
  • Shocks the sound and eliminates reverberation
  • Thermal insulation
  • Easy to clean with a wet cloth

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.