Skip to product information
  • Vetonek Estantería esquina 5 niveles madera contrachapada y acero azul

Corner shelf 5 wood and steel blue levels

116,40 €
116,40 € 131,01 €
You save 11% (14,61 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This corner shelf is an excellent option for both domestic and commercial use, since it provides a lot of space to keep all your things well organized. Resistant material: The storage shelf consists of a steel structure and plywood boards. Steel structures guarantee their strength and stability while plywood offers strength, stability and moisture resistance. Great load capacity: thanks to the thick material, the reinforcement bars under each shelf and to the design without bolts, this shelf It has a higher load capacity. Flexible discharge: you can adjust the height of the shelves. Thus, the shelf provides a wide storage space for all the things you want to store and to keep the space well organized and tidy at all times. Note: Each product comes with a mounting manual in the box to facilitate assembly. WARNING: To avoid overturning, this product should be used with the device provided to fix it to the wall (the delivery does not include the wall device).

  • Color: blue
  • Material: Galvanized steel, plywood, plastic
  • Dimensions: 90 x 90 x 200 cm (length x width x high)
  • Plywood table thickness: 4 mm
  • Steel thickness: 0.6 mm
  • Total capacity: 875 kg (175 kg for shelf)
  • Galvanized anti -heal steel
  • Plastic covers for legs in order to protect the scratch floor
  • 5 height adjustable shelves
  • With 2 reinforcement bars under each shelf
  • They can be mounted without screws/bolts

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.