Corner shelf 5 wood and steel blue levels
Description
This corner shelf is an excellent option for both domestic and commercial use, since it provides a lot of space to keep all your things well organized. Resistant material: The storage shelf consists of a steel structure and plywood boards. Steel structures guarantee their strength and stability while plywood offers strength, stability and moisture resistance. Fuerto loading capacity: thanks to thick material, a reinforcement bar under each shelf and the design of shelves without bolts, This garage storage shelf has a great load capacity. Flexible diamacement: This storage shelf can be divided into two small shelves. In addition, the layers are adjustable in height. Therefore, the shelf provides a wide storage space for all the items you want to keep and always maintains its orderly and well organized space. WARNING: To prevent it from turning, this product should be used with the wall fixing device (not included).
- Color: blue
- Material: Galvanized steel, plywood
- Dimensions: 75 x 75 x 180 cm (length x width x high)
- Plywood table thickness: 4 mm
- Steel thickness: 0.6 mm
- Total capacity: 375 kg (75 kg per cape)
- Galvanized anti -heal steel
- 5 height adjustable shelves
- With a reinforcement bar under each shelf
- They can be mounted without screws/bolts
- They can be disassembled on two small independent shelves
- Requires assembly: Yes
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.