Skip to product information
  • Vetonek Sombrilla colgante de doble techo de terracota 300x300 cm

Double terracotta roof pendant umbrella 300x300 cm

270,93 €
270,93 € 304,92 €
You save 11% (33,99 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This elegant dual -deck volding garden umbrella is a perfect choice to create some shadow and protect you from the harmful UVA of the Sun. Durable material: Polyester is a synthetic material known for its resistance to UV rays and elastic resistance. The polyester with a Water resistant coating, so the perfect choice for wet or rainy conditions is That this parasol is very stable and durable. The outdoor umbrella also has a robust cross base to add stability. 360 -degree tiltable and rotating design: Adjust the awning position with the inclination mechanism to maintain the fresh and comfortable outer area throughout the day. You can also turn the umbrella 360 degrees horizontal just by stepping on the pedal and turning the post. Double roof design: the double roof design allows enough ventilation and air flow, which makes the patio umbrella more stable in front of the wind and maintains the freshness under it. Cruise system: the crank mechanism allows you to open and close the garden umbrella effortlessly. Note: This product is not 100% waterproof. Therefore, we recommend treating it with a waterproof spray for better waterproofing. Each product comes with a mounting manual in the box to facilitate assembly.

  • Cover color: Terracota
  • Material: fabric (100% polyester) with PA cladding, aluminum with powder coating
  • Total dimensions: 300 x 300 x 258 cm (length x width x high)
  • Cross base dimensions: 100 x 100 cm (length x wide)
  • Post size: 7.5 x 5 cm (length x wide)
  • With air outlet

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.