Skip to product information
  • Vetonek Piscina Easy Set OctoPool 274x76 cm

Easy Set Pool Octopool 274x76 cm

68,54 €
68,54 € 77,14 €
You save 11% (8,60 €)
Tax included. Shipping calculated at checkout.

Description

Have fun a lot in the patio with family and friends in the Easy Set Octopool swelling pool of Vetonek! This elegant pool on the ground has reinforced walls made of tritech, a 3 -layer resistant material that consists of a strong pvc rolled PVC and a polyester mesh. This inflatable pool can be installed quickly and easily. It only extends the pool on a flat surface, inflate the upper ring, then fill the water pool. In addition, the four tentacles with two integrated sprinklers offer greater fun. It is especially suitable for children. When you don't use it, you can easily save it until next summer.

  • Color: blue
  • Material: PVC Aro and bottom + Tritech wall
  • Dimensions: 274 x 76 cm (High diameter)
  • Water capacity (80%): 3153 L
  • Four tentacles with two integrated sprinklers
  • Quick installation in 10 minutes
  • You do not need assembly tools
  • The integrated flow control valve is coupled to the garden hose (with adapter included) to drain the water
  • Easy to save during the time that is not used
  • Vetonek article number: 57397
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.