Skip to product information
  • Vetonek Estructura cama sin colchón con cabecero metal blanco 160x200cm

Estructura cama sin colchón con cabecero metal blanco 160x200cm

132,13 €
132,13 € 148,71 €
You save 11% (16,58 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Si estás buscando una estructura de cama robusta para el dormitorio, ¡esta clásica estructura de cama con un diseño elegante y atemporal es la elección perfecta para ti! Construcción robusta de metal: La estructura de la cama está hecha de acero con recubrimiento en polvo. El acero es un material muy duro y fuerte, que ofrece una solidez y estabilidad excepcionales.Listones y patas de metal: La estructura metálica de la cama se completa con patas centrales y listones de metal con el fin de ofrecer al colchón el soporte y la transpirabilidad que tanto necesita.Espacio de almacenamiento adicional: Para mayor comodidad, la cama de invitados también dispone de un espacio debajo para guardar las cajas de almacenaje y que no se vean.Excelente apoyo: El cabecero de la cama te ofrece un excelente soporte para la espalda mientras estás sentado en la cama leyendo o mirando televisión. Información útil:El colchón no está incluido con la cama. Disponemos de una variada selección de colchones. Puedes echar un vistazo a nuestra tienda para buscar el colchón correspondiente.

  • Color: Blanco
  • Material: Acero
  • Dimensiones totales: 207 x 166 x 90 cm (largo x ancho x alto)
  • Tamaño de colchón adecuado: 160 x 200 cm (ancho x largo)(el colchón no está incluido)
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.