Skip to product information
  • Vetonek Estructura de cama sin colchón madera pino blanco 140x190 cm

Estructura de cama sin colchón madera pino blanco 140x190 cm

107,89 €
107,89 € 121,43 €
You save 11% (13,54 €)
Tax included. Shipping calculated at checkout.

Description

¡Lleva la ruta moderna a tu dormitorio con esta estructura de cama de madera! Es un aporte práctico y decorativo para tu hogar. Madera maciza de primera calidad: La madera maciza de pino es un hermoso material natural. Trata la superficie con aceite, cera, laca o un acabado de barniz para obtener una superficie más fuerte y fácil de limpiar. La madera de pino tiene vetas rectas y los nudos le dan al material su aspecto rústico característico.Estructura de cama resistente: el marco de cama de madera está especialmente diseñado con lamas robustas que pueden ofrecer el soporte y la comodidad necesarios.Cabecero cómodo: El cabecero clásico te permite descansar cómodamente mientras lees o ves una película. Nota:La entrega incluye solo una estructura de cama. El colchón no está incluido. Puedes echar un vistazo en nuestra tienda para buscar colchones a juego.

  • Color: Blanco
  • Material: Madera de pino maciza
  • Dimensiones totales: 195,5 x 145,5 x 69,5 cm (largo x ancho x alto)
  • Altura de la cama desde el suelo: 21 cm
  • Dimensiones de colchón adecuado: 140 x 190 cm (ancho x largo) (el colchón no está incluido)
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.