Skip to product information
  • Vetonek Estantes flotantes pared 3 pzas libros/DVD MDF blanco negro

Floating shelves 3 pcs books/dvd mdf black black

69,47 €
69,47 € 78,19 €
You save 11% (8,72 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This set of 3 cube -shaped shelves will become the center of attention of any room. With an invisible assembly system, these bucket -shaped shelves are easy to place and will be a perfect place to place items such as awards, books, collectibles, ornaments, etc. These cube -shaped shelves can be hung on the wall or simply stack on the floor to create an exclusive storage area. They can be mounted together or separately. These cube -shaped shelves adapt to any type of decoration and will convert a boring wall into a decorative element! They are made of high quality MDF material with a matt finish. The delivery includes 3 shelves in the form of a wall cube, screws and wall tacos.

  • Color: White with black details
  • Material: MDF (Medium density fiber board) with matt finish
  • Dimensions of the largest shelf: 23 x 10 x 23 cm (wide x high x high)
  • Average shelf dimensions: 18 x 10 x 18 cm (wide x high x high)
  • Dimensions of the small shelf: 13 x 10 x 13 cm (wide x high x high)
  • Invisible assembly system
  • Delivery includes 3 cube -shaped wall shelves, screws and wall tacos
  • Maximum loading capacity for shelf: 5 kg

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.