Flufsan panties for adult incontinence 14 pieces size S

17,92 €
17,92 € 20,17 €
You save 11% (2,25 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Panties for adult incontinence can absorb fluids to help avoid losses in addition to providing comfort. Comfortable and breathable: Panties for adult incontinence with elastic waist provide a perfect adjustment to the body and a great comfort of use. In addition, the special non -tissue material prevents moisture on the surface, keeping dry, healthy and comfortable skin to carry. Extra -absorption: the panties for incontinence reduce the diffusion of odors and keep you dry throughout the day, absorbing until approximately 1200 ml of liquid out of the surface. Antifugal barrier: Panties for adult incontinence have an antifugal barrier that makes them flexible enough to move with you. You will remain dry and comfortable whether you are sitting, standing or lying. Set: Disposable panties for incontinence do not contain latex, which reduces the possibility of allergic reactions and favors skin health. Moisture indicator: panties for Pull incontinence -Up include a moisture indicator, with special blue ink that fades when the diaper gets wet, which facilitates the understanding of when to change the underlines for incontinence.

  • Color: White
  • Material: Non -tissue, polyethylene
  • Pieces (by package): 14
  • Size: s
  • Circumference: 50-75 cm
  • With moisture indicator
  • Without latex
  • Leak protection
  • Applicable gender: Unisex
  • Absorbency: Extra
  • Absorbency +/- 5%: 1200 ml
  • Type of incontinence: abundant / severe

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.