Skip to product information
  • Vetonek Juego de comedor de jardín clase B 7 piezas madera maciza teca

Garden Bining Set B 7 pieces Maciza wood teak

689,44 €
689,44 € 775,95 €
You save 11% (86,51 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This set of category B teak garden dining room is perfect for outdoor use and will be the center of attention of your garden, terrace or patio. Thanks to its special design, the table can be extended up to 160 cm when extra space is needed. Made of high quality teak wood, waterproof and lasting for many years of use, it is also resistant to moisture and insects. With a robust structure, this set is very safe and will give you a lot of comfort to spend time with your family and friends. A beautiful finish to give the wood has been applied a warm color. The table has a hole to put an umbrella. Delivery includes 1 extensible table and 6 folding chairs. Keep in mind: the hardware is very oxidized, therefore, we sell the product as "occasion." However, we also add a set of again tool in the delivery so that I can use it with the product by itself.

  • Material: Teak wood (polished finish)
  • Table dimensions: (110-160) x 80 x 75 cm (length x width x height)
  • Chair dimensions: 55 x 60 x 89 cm (wide x high x high)
  • The table can be extended from 110 cm to 160 cm
  • With a hole for the umbrella
  • Delivery includes 1 extensible table and 6 folding chairs with plates.
  • Note:
  • The hardware is very oxidized, so we sell the product as "occasion"
  • A new set of horses are also included in the delivery, so you can use it with the product on your own.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.