Skip to product information
  • Vetonek Sombrilla de jardín con LEDs poste acero marrón 223x223x213 cm

Garden umbrella with LEDs Postte Brown steel 223x223x213 cm

118,53 €
118,53 € 133,40 €
You save 11% (14,87 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This garden umbrella with LED is perfect to create some shadow and protect you from the harmful UV rays of the sun. Protection against sun and rain: made of durable polyester, this umbrella offers protection against sun and rain, creating an ideal place to enjoy the outdoo The upper part, which guarantees that the roof remains in an upright position even in windy days. Crucin and inclination emphasis: This outdoor umbrella has a crank system that allows you to open it and close it easily. The swinging design with buttons allows you to bow the umbrella to block the sun and stay fresh and comfortable. Bright LED LEDs: Integrated LED lights of the umbrella illuminate your outdoor space and create a cozy and romantic atmosphere when the sun sets. Useful information: This product is not a toy! Make sure the children do not use the umbrella, nor the awning, nor the basis to play or climb. Don't use open fire (eg barbecue or garden grill) below or right next to this product. This product does not It is 100% waterproof. We recommend treating this product with a waterproof spray for better water resistance.

  • Color: Brown
  • Material: fabric (100% polyester), powder coating steel, straw
  • Dimensions: 223 x 223 x 213 cm (length x width x high)
  • Post diameter: 38 mm
  • Slipping function
  • It has 8 -layer straw cover
  • It has 3 LED lights in each rod
  • Requires assembly: Yes
This product is not a toy! Make sure children do not use parasol, awning or the basis to play or climb. Do not use open fire (for example, a barbecue or garden grill) below or next to this product. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.