Skip to product information
  • Vetonek Adorno de pared de jardín acero corten diseño árbol 55x55 cm

Garden wall ornament Corten Design Tree 55x55 cm

48,56 €
48,56 € 54,65 €
You save 11% (6,09 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Convert a wall or white valle into a masterpiece with this garden wall ornament. Durable material: Corten steel, also known as weather resistant steel. This is anticorrosive by its very nature. It develops an oxidized protective layer against corrosion when exposed for the first time to atmospheric conditions. Therefore, it is not necessary to paint it. This can help you save on maintenance and repair costs. The Brown Distinctive Corten Corten will surely attract attention. Finally, Corten steel is exceptionally durable and will resist the test of time. Exquisite design: the metal wall decoration has a hollow design with a tree print, which creates a natural environment in the garden. Fácil Installation: The wall decoration: the decoration decoration Outside is easy to install with the assembly holes of the back. Useful information: When you receive this product, it will not yet be oxidized and will have a normal metallic color, but will oxidize over time. You can accelerate the oxidation process by spraying it with soapy water and salt water. So that your clothes are not stained, avoid contact with the developing oxide layer.

  • Color: oxidized
  • Material: Corten steel
  • Dimensions: 55 x 55 x 0.7 cm (length x width x thickness)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.