Skip to product information

GHIO KD WOOD JARDINER 70x30cm. 42 liters

78,90 €
78,90 €
Tax included. Shipping calculated at checkout.

Description

Transform your exteriors into an oasis of tranquility and style with the exclusive planters from Vetonek.com. Made of resistant Nordic pine wood, these pieces are ideal for decorating terraces, balconies, and more, without requiring varnish for maintenance. Its unique design not only enhances the beauty of your spaces, but also invites the creation of environments full of life and nature. At Vetonek.com, we know that the success of your plants begins with the right substrate . Therefore, we invite you to explore our special selection of substrates, designed to promote healthy and vigorous growth of your plantations. Discover the perfect combination of elegance, durability and plant care by visiting our substrates section. Give your outdoor spaces the green and sophisticated touch they deserve with our planters, and enjoy the lasting beauty that only nature can offer.

Rectangular planter ideal for decorating terraces, balconies, porches, attics or any place where you want to create an elegant and natural atmosphere. Fabracada Made of high-quality Nordic pine wood, suitable for outdoor use without the need for varnish. It is supplied disassembled and provided with the necessary hardware and instructions for assembly.

  • Capacity:
    • 42 L
  • Measures:
    • 70x30x30 cm.
  • This product is delivered unassembled.
  • Includes geotextile fabric for proper water drainage.
  • Made of slow-growing Nordic pine.
  • Autoclave treatment level 4. Suitable for outdoor use.
  • Weight:
    • 9 kg.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.