Skip to product information
  • Vetonek Gallinero madera maciza de pino y abeto gris 170x81x110 cm

Gray pine and pine wood chicken coop 170x81x110 cm

285,52 €
285,52 € 321,35 €
You save 11% (35,83 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This high quality wood refuge offers a comfortable and pleasant space where your small animals can relax; Above all, chickens. The construction of Iron Metal Mesh guarantees that you can monitor chickens and that they can receive enough fresh air. This chicken coop has a high quality wood structure, so it will last years. The green roof keeps the rain out of the chicken coop and the cubicle offers a perfect sleeping area. The easily accessible ramp drives from the ground floor to the upper floor. The removable tray facilitates cleaning. The doors close easily and blocked with a pestillo. This chickens wooden cage is easy to assemble.

  • Color: gray and green
  • Total dimensions: 170 x 81 x 110 cm (wide x high x high)
  • Internal dimensions: 117 x 61 x 104 cm (wide x high x high)
  • Box dimensions for eggs: 52 x 38 x 34 cm (long x high x high)
  • Material: Sounded pine / firing wood structure + Iron metal mesh with powder coating
  • Covered roof with water resistant fabric (100% polyester)
  • With non -slip ramp to facilitate access to the upper floor
  • A removable tray to facilitate maintenance
  • Outdoors
  • Suitable for chickens
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.