Skip to product information
  • Vetonek Sombrilla de jardín con base portátil verde

Green -based garden umbrella

327,90 €
327,90 € 369,05 €
You save 11% (41,15 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This garden parasol has a robust aluminum structure, a UVA resistant awning and a portable base. It is ideal to protect from the sun. This garden umbrella can be easily opened and closed with just turn the post of the post. The aluminum post, together with the 8 resistant aluminum rods, make the outdoor parasol very durable. The exclusive design of this parasol allows you to tilt it and turn it in 360 degrees to block the sun. In addition, the large cross -steel base is removable and provides stability without occupying too much space. The extra base of the umbrella consists of 4 independent pieces that can be filled with 60 liters of water or 80 kg of sand. It is ideal to stabilize umbrellas with a cross -based. Without the filling, the umbrella foot is light, so you can move it easily.

  • Parasol:
  • Color: Green
  • Height: 2.4 m
  • Diameter: 3 m
  • Structure material: aluminum + steel
  • Includes a crank
  • With a cross steel base
  • Extra umbrella base:
  • Color: black
  • Material: Plastic
  • Size of each piece 50 x 50 x 7.5 cm (length x width x high)
  • It can be filled with water or sand
  • Capacity of each piece: 15 L
  • Consists of four parts
  • It is used for all types of cross bases

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.