Skip to product information
  • Vetonek Árbol de Navidad helado con luces, bolas y piñas 210 cm

Ice cream with lights, balls and pineapples 210 cm

152,30 €
152,30 € 171,42 €
You save 11% (19,12 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Christmas tree gives you the same impression as a real one. You can ride quickly and easily. The Christmas tree has more than 910 branches, all of them can be aligned individually. A couple of branches have white tips. Pineapples and white tips included make this tree perfectly festive for Christmas holidays. The Christmas tree is on a solid base for optimal stability. When Christmas ends, you can disassemble the tree so you can save it in an easy way, ready to use next year. The artificial Christmas tree is durable and usable for years, so it is not necessary to cut a tree every year. It is also economical because you will only need a tree for years, which will reduce your expenses over the years. With low consumption LED lights, it lights marvelously and creates a cozy festive atmosphere. Moreover, decorated with the beautiful beak and balls, this Christmas tree will be very striking in your home. Note: The product has a USB connector, but the 5 V certified USB supply source is not included.

  • Total height: 210 cm
  • Support diameter: 45 cm
  • Tree diameter: 105 cm
  • Number of pineapples: 28
  • Support included: Yes
  • Length led led strip: 30 m
  • Voltage: DC 5 V
  • Power: 5 w
  • Number of branches: 910
  • With 300 LEDs
  • Dual USB connection
  • Delivery contains:
  • 1 x Christmas tree
  • 1 x support
  • 1 x LED light rope
  • 1 x peak
  • 40 x 3 cm balls
  • 40 x 3 cm balls
  • 40 x 3 cm balls
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.